General construction work

It includes all stages of construction, starting with the territory planning, pre-construction activities on the construction site, followed by a range of foundation work, installation of structures and ending with the external and internal finishing. Our team guarantees high quality of work and strict adherence to all standards and safety requirements.

50+ facilities constructed on a turnkey basis

in touch with the customer 24/7

Building facilities of any level of complexity

Developing the best solutions

Providing official guarantees

14a218cb-0fc2-4b4e-a54b-9d49a5faee45-min

It includes all stages of construction, starting with the territory planning, pre-construction activities on the construction site, followed by a range of foundation work, installation of structures and ending with the external and internal finishing. Our team guarantees high quality of work and strict adhering to all standards and safety requirements.

1.Pre-construction activities

Construction activities that consist of a set of actions to prepare the territory for the construction of structures and buildings. They include: laying utility connections, equipping the construction site with the necessary amenities, breaking fresh ground, the site planning, building access roads, demolishing existing buildings, and other work under the approved project

2. Earthwork operations

Earthwork operations are one of the most important and costly stages of the construction process. This is a set of actions that includes breaking the ground, excavation and management of soil. Resulting trenches and pits serve as the foundation for buildings and other structures. Thanks to accurate calculation of the cost and time of performing this stage made by Smartkomplekt, it is possible to choose the best technique of performing earthworks, in particular, determine the feasibility of disposing of soil or spreading it around the territory. Our specialists will ensure high-quality performance of work, with due account for the individual needs and requirements of the customer, using state-of-the-art technologies and equipment

3. In-situ concrete works

In-situ concrete works are a complex and time-consuming process that requires a high level of professionalism, special skills and profound experience. The basis of these works is reinforced concreting. We use various reinforcement types, selected in accordance with the loads the structures are going to bear. If required, we make the reinforcement as a single frame, filled later with a concrete mixture. Our specialists have all the necessary knowledge and skills to perform concrete work, which ensures high quality or performance. We should note that the quality of work depends not only on the skill of the builders, but also on the properties of the concrete. The quality of concrete can be evaluated by various indicators that show its durability, weather resistance, water resistance, and other properties. Concrete is used for pouring foundations, erecting partitions, walls and other structural elements. All in-situ concrete works performed by our company are carried out in accordance with the design documentation and in compliance with all relevant requirements.

4. Finishing work

Finishing work is the final stage of construction, which requires considerable effort and skills. The appearance of the building and its functional characteristics hinge on the quality of this work. Finishing coatings need to be resistant to mechanical damage, suitable for sanitary and hygienic treatment, non-toxic and able to maintain their original appearance for a long time. Besides, they are able to change the acoustic properties of rooms, affect insolation and air exchange.

There are two types of finishing work - internal and external.

Internal finishing work includes

fit-out work,
facing,
painting

External finishing work includes building facade repairs:

plastering,
facing,
painting, and so on.

High-quality finishing is possible only with high-quality supplies and the work performed by skilled specialists

5. Installation of metal structures

Installation of metal structures includes step-by-step assembly of the metal frame using state-of-the-art technologies and meeting current safety standards. This is one of the leading areas of construction, which allows to build large complexes really fast. A strong building frame is the main guarantee of its durability and economic efficiency. The stability of the entire structure is provided by a powerful system of connections, which makes the building resistant to various vibrations. All structural elements of the frame are made of rolled steel, the load-bearing capacity of which is determined by the size of the building, its purpose and load.

Installation of metal structures consists of two stages:

first, we build underground elements of the structure (such as foundation and utility systems);
then we install surface-mounted elements (such as supporting construction frame, suspended elements, partitions, and so on).

Advantages of prefabricated buildings:

strong and light-weight structures,
good thermal insulation properties
easy installation and replacement of structural elements, low cost of supplies and human labour.

6. Installation of sandwich panels

Sandwich panels are ready-to-install structural elements used for rapid construction of structures. They can be installed under any weather conditions, which allows to construct buildings really fast with minimal costs. The key point is to adhere to the technological process, which will ensure the successful completion of construction work.

These versatile building supplies are widely used for the construction of shopping malls and logistics centres, warehouses, garages, as well as premises to keep livestock and poultry.

Advantages of sandwich panels

environmental safety,
durability,
fire resistance,
good sound insulation properties,
low thermal conductivity

Their major advantage is easy and fast installation

7. Roofwork

Roofwork is a range of activities that include installation, insulation and repair of the roof. Smartkomplekt specialists perform all types of roofwork, both simple and complex, using cutting-edge technologies and advanced supplies to reliably protect the building from the negative effects of precipitation, ultraviolet light and other factors.

Construction technologies are constantly evolving, with new building supplies and standard operating procedures emerging. The diverse properties of these supplies and different types of roofing require special training to perform high-quality work. When choosing roofing, one should take into account the structure of the building, the shape and slope of the roof to ensure the best technical results. High-quality work and the right choice of supplies guarantee the durability of the roof and its nice appearance.

Our excellence is testified by

Construction license

To commission the project, we need to obtain all the necessary documents and permits, and be sure of the safety of the facility and the quality of our work. To build the facilities of 4 and 5 complexity levels (the buildings designed to accommodate more than 300 people) we need to have a construction license issued. This category includes educational institutions, shopping centres, train stations, government agencies, hotels, and so on.

Construction license

License for installation of smoke extraction systems

The license grants a permission to carry out activities related to the installation, maintenance and repair of fire safety equipment for buildings and structures.

License for installation of smoke extraction systems

Admission of work at height

This type of work is performed by professionals with the help of special equipment. The mobility and reliability of such equipment allows to perform all types of construction or repair, as well as installation and dismantling operations.

Admission to work of increased danger

Work performed in areas of permanent or possible action of hazardous production factors, the occurrence of which is not related to the nature of the work performed, requires developing and meeting some extra safety measures for each specific production operation before performing the work.

Working in dangerous conditions requires a special safe work permit.

Admission to work in electrical installations up to 1000V

Employees from among electrical engineering and electrotechnological personnel need to pass a knowledge test of the regulations and other safety requirements for the organisation and performance of work in the electric plants within the framework of the requirements for the relevant position or profession